Siemens HiPath BizIP, Руководство по эксплуатации

Страница: 11 / 22

11
Performing installation
What was your previous configuration?
• I have a PC network (Ethernet LAN) with a router and DSL con-
nection.
Disconnect the existing router from the DSL modem and from the net-
work switch. The old router is no longer required because this function
is performed by the BizIP AD 20.
BizIP AD 20 also performs the DHCP server function.
• I have a single PC with DSL access.
Disconnect the PC from the DSL modem. You now need a network
switch to connect the devices.
If you are unable to do without your existing router (for example, be-
cause of VPN), you can operate BizIP AD 20 behind the router. See Ad-
ministratorhandbuch.
• I do not have a PC network or DSL access.
First apply to the relevant DSL provider for DSL access and install the
devices provided (normally a DSL splitter and modem). Contact your
DSL provider for information on how to install the devices.
Before beginning the remainder of the installation, you should have a free
port on an ISDN network terminator (NTBA) and on a DSL modem (NTB-
BA), depending on the type of access you require.
If you have a combined modem and router, you must disable
the router function (the router does not perform a PPPoE logon).
The HiPath BizIP devices must all be located in one LAN segment
without intermediate routing.