Siemens HiNet LP5100, Руководство по эксплуатации и администрированию

Страница: 22 / 134

Operation
22
Incoming call
In the case of an incoming call, you normally hear the ringer tone.
If you are defining settings on the telephone during this, the pro-
cess is hold. After the telephone conversation you will be returned
to the point in the menu structure you were in before the call.
However, if you are using the menus "Administration" or "Diagno-
sis", you will not be interrupted, and the person calling will receive
a busy signal.
Incoming call in idle mode
Picking up a call
The HiNet LP5100 rings giving the set call signal.
If the number of the caller is transmitted, it will appear in the dis-
play. Otherwise the display will read:
You can now lift off the handset and talk with the person calling.
Refuse call
You can refuse an incoming call. If the number of the caller is
transmitted, it will be stored in the Missed Calls list so that you will
be able to call that person back at a later date.
The person calling will receive the message "Rejected".
Xxxxxxxxxxxxxxxxx
Pickup call?
Call no. not known
Pickup call?
>
08972261485
Pickup call?
Choose "Refuse call"
08972261485
Refuse call?
>
Confirm your choice
and
13:15
Page forward with 20.06.98
>
return to the basic
menu