Siemens AG
3.
Placing in Service
The system automatically goes into service when the power plug
is connected. Now load the standard customer data (see 4.5).
3.1
Standard Customer Data
After the standard customer data have been loaded, the following
entries reside in the customer dala memory:
- Call allocation for trunk circuits 1 and 2
•
daytime service:
subscr. 1- 6
•
nighttime service:
subscr. 1 - 6
- Line
allocation
for
•
trunk circuit 1:
subscr. 1 - 6
•
trunk circuit 2:
subscr. 1 - 6
-
Data protection:
no subscr.
-
Blocking outgoing international calls
no subscr.
-
Dialing method of the terminals
subscr. 1-6 DP
-
Call forwarding:
blocked
-
Do-not disturb
blocked
-
Call transfer - await no answer
blocked
-
Interpretation of exchange tone
blocked
3.2
Modifying Customer Data
The data listed under point 3.1 can be modified via the master
station (subscriber 1). The procedures are described in the
Operating Instructions under "Programmable Functions".
3.3
Protection of Customer Data
All customer data reside in an EEPROM and are thus protected
against power failure.
4. Code and
Call Number Plan
4.1 Call Number Plan
call number
(User No.)
-
User 1 (master station):
1
-
User 2:
2
-
User 3:
3
-
User 4:
4
-
User 5:
5
-
User6: 6
-
Entrance telephone
7
4.2 Codes for the Users and the
Master
Station
Code
-
Exchange 1 or 2:
0
-
Exchange 1:
91
-
Exchange 2:
92
-
Reserve exchange
00
-
External call waiting:
000
-
Automatic callback
2 x user No.
-
Internal call waiting:
3 x user No. + 0
-
Entrance telephone
• Answer
7
-
• Answer and actuate door opener
7 + 77
-
Call hold
•
with DP: 0
•
with DTMF: flash key
Call forwarding
•
activate:
own user No. + destination user No.
•
deactivate
2 x own user No.
Do-not-disturb (except master stn.)
•
activate:
own user No. + 0
•
deactivate
2 x own user No.
4.3
Codes for the Master Station
- Night service feature
•
activate 10
•
deactivate 11
4.4
Programmable Functions for the Master Station
Activate programming mode
19999 +
- Change daytime call allocation for
• trunk circuit 1:
51 + user No.
• trunk circuit 2:
52 + user No.
- Enter standard daytime call allocation for
•
trunk circuit 1:
510
•
trunk circuit 2:
520
- Change nighttime call allocation for
•
trunk circuit 1:
41 + user No.
•
trunk circuit 2:
42 + user No.
- Enter standard nighttime call allocation for
•
trunk circuit 1:
410
•
trunk circuit 2:
420
- Line
allocation
for
•
trunk circuit 1
:
61 + user No.
•
trunk circuit
2:
62 + user No.
- Enter standard line allocation for
•
trunk circuit 1
:
610
•
trunk circuit
2:
620
- Data
protection
•
activate 2
+ user No.
•
deactivate for all users
20
- Blocking
outgoing international calls
• activate
7 + user No.
• deactivate for all users
70
Dialing method of the terminals
• all users DP
90
• all users DTMF
91,92,93,94,95.96
- Do-not-disturb,
call
diversion
•
release
11
•
block
10
- Transfer before answering
•
release
31
•
block
30
- Interpretation of exchange tone
•
activate selectively
8 + user No.
•
activate universally
89
•
deactivate universally
80
4.5
Other Programmable Functions for the Master
Station
-
Cancel activated do-not-disturb and activated call forwarding
for
19111
-
Load standard customer data
19000
-
Print system programming
19998
Issued by Kommunikationssysteme, PN VS
Service