en
Rails
20
p
Rails
Rails
Removing the hook-in racks
The hook-in racks are each fixed to the side panels of
the cooking compartment at three points.
1.
Grip the front of the hook-in rack and pull it to the
middle of the cooking compartment.
The front hook of the hook-in rack will release from
the hole.
2.
Fold out the hook-in rack further and pull it from the
rear holes of the side panel.
3.
Remove the hook-in rack from the cooking
compartment.
Inserting the hook-in rack
1.
Insert the hooks of the hook-in rack into the rear
holes in the side panel.
2.
Press the front hook of the hook-in rack into the hole.
q
Appliance door
Appliance
door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the oven door.
Removing the door panels
1.
Open the oven door fully.
2.
Lock both hinges on the left and right using the
locking pin.
Note:
The locking pins must be fully inserted into the
holes in the hinges.
3.
Lift the bottom of the inner panel slightly until the
fastening pins come out of the holder (
1
).
4.
Carefully lift the top of the inner panel until the
fastening pins come out of the holder (
2
).
Caution!
When lifting the inner panel, the middle panel may
stick to the inner panel. Ensure that the middle panel
does not fall.
5.
Remove the inner panel.
Clean the panels with glass cleaner and a soft cloth.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
D
E
