Siemens HG73G8256M, Инструкция по эксплуатации

Страница: 14 / 48

14
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
Removing the appliance door
:
Risk of injury!
Whenever the hinges are not locked, they snap shut with great
force. When removing the oven door, ensure that the locking
pins are fully inserted into the holes in the hinges.
1.
Open the oven door fully.
2.
Lock both hinges on the left and right using a locking pin
(a)
.
Note:
The locking pins must be fully inserted into the holes in
the hinges.
3.
Grip the oven door on either side with both hands and close
the oven door by approx. 30°
(b)
.
4.
Raise the oven door slightly and pull it out.
Note:
Do not fully close the oven door. The hinges may
become bent and the enamel may be damaged.
Fitting the appliance door
1.
Grip the oven door on either side with both hands.
2.
Slide the hinges into the slots in the oven
(a).
Note:
The notch below the hinges must engage into the
frame of the oven
(b)
.
3.
Lower the door downwards.
4.
Remove the locking pins.
:
Risk of injury!
If the oven door falls out accidentally or a hinge snaps shut, do
not reach into the hinge. Call after-sales service.
Removing and inserting the hook-in racks
You can remove the hook-in racks for easier cleaning.
Removing the hook-in racks
1.
Unscrew the right and left-hand screws on the hook-in rack.
2.
Remove the hook-in rack.
Inserting the hook-in rack
1.
Hold the hook-in rack in front of the drill holes in the side
panel.
2.
Screw in the hook-in rack tight again using the screws.
D E
E D