Siemens HB78GB.90B, Инструкция по эксплуатации

Страница: 11 / 40

11
Rapid heating ends when all the bars are filled. You will hear a
short signal. The
c
symbol goes out. Place your dish in the
cooking compartment.
Notes
■
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this runs independently of
rapid heating and counts down immediately when operation
is started.
■
You can use the
±
button to check the current cooking
compartment temperature during rapid heating.
■
To ensure an even cooking result, do not place your dish in
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the
c
button. The symbol goes out.
Time-setting options
You can call up the time-setting options menu by pressing
the
0
button. The following functions are available:
If the oven is switched off:
■
Setting the timer
■
Setting the clock
If the oven is switched on:
■
Setting the timer
■
Setting the cooking time
■
Setting a later end time
Setting the time-setting options
­
in brief
1.
Press the
0
button to open the menu.
2.
Switch to the required function, using the
¾
or
¿
button. The
setting area is light, the text is dark.
3.
Use the rotary selector to set the clock or cooking time.
4. Press the
0
button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1.
Press the
0
button.
The time-setting options menu opens.
2. Set the running time for the timer using the rotary selector.
3.
Press the
0
button to close the menu.
The display returns to its previous state. The
U
symbol for the
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The display shows
U
0:00. You can cancel
the signal earlier by pressing the
0
button. Press the
0
button
to close the time-setting options menu.
Cancelling the timer time
Open the time-setting options menu using the
0
button and
turn the time back to 0:00. Press the
0
button to close the
menu.
Changing the timer time
Open the time-setting options menu with the
0
button and
change the running time for the timer in the next few seconds.
Press the
0
button to close the menu.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for top/bottom heating, 180 °C,
cooking time of 45 minutes.
1.
Press the
0
button.
The Time-setting options menu appears.
2.
Using the
¿
or
¾
button, move to the cooking time and set
the cooking time using the rotary selector.
3. Press the
0
button.
The Time-setting options menu closes.
4. If the operation has not yet started, press the
†
button.
You can see the
x
cooking time counting down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as
x
0:00. You can cancel the signal early
by pressing the
0
button.
Cancelling the cooking time
Press the
0
button to open the menu. Move to the cooking
time using the
¿
or
¾
button and set the cooking time to 0:00
with the rotary selector. The type of heating and temperature
set are shown in the display. The programme will then continue
untimed.
Changing the cooking time
Press the
0
button to open the menu. Using the
¿
or
¾
button, move to the cooking time and set the cooking time
using the rotary selector. Press the
0
button to close the
menu.
7LPHU
PLQVHF
&RRNLQJWLPH
PLQVHF
7\SHVRIKHDWLQJ
7LPHU
PLQVHF &RRNLQJWLPH
PLQVHF
7\SHVRIKHDWLQJ
3UHKHDWLQJ
ƒ&
7RS
ERWWRPKHDWLQJ