Appliance door
en
17
7.
If necessary, you can remove the condensate
trough for cleaning.
‒
Open the appliance door.
‒
Tilt the condensate trough upwards and remove
it.
8.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶
Do not use glass scrapers, sharp or abrasive
cleaning aids, or harsh cleaning products.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
9.
Clean the condensate trough with a cloth and hot
soapy water.
10.
Clean the appliance door.
"Suitable cleaning agents", Page 12
11.
Dry the door panes and refit them.
"Fitting the door panes", Page 17
14.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
1.
Open the appliance door fully.
2.
Place the condensate trough vertically in the re-
tainer and turn it downwards.
3.
Slide the inner pane into the left- and right-hand
retainers .
4.
Push the inner pane upwards until it is in the left-
and right-hand retainers .
5.
Put the door cover in position and push down on
it until you hear it click into place.
6.
Open the appliance door fully.
7.
Close the locking levers on the left- and right-hand
hinges .
a
The locking levers are closed. The appliance door is
secured and cannot be detached.
8.
Close the appliance door.
Note:
Do not use the cooking compartment again until
the door panes have been correctly fitted.
