12
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
N
arrow.
To call up the
V
timer,
x
cooking time,
y
end time or
0
clock, press the
0
button repeatedly until the
N
arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After connecting the appliance to the mains or after a power
cut, the
0
symbol and three zeros flash in the display. Set the
clock.
1.
Press the
0
button.
The clock in the display shows 12:00. The time symbols light
up and the
N
arrow is next to
0
.
2.
Use the
@
or
A
button to set the clock.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
1.
Press the
0
button four times.
The time symbols light up in the display and the
N
arrow is
next to
0
.
2.
Use the
@
or
A
button to change the clock.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section
Changing the basic settings
.
Childproof lock
To prevent children from switching on the oven accidentally, it
has a childproof lock.
The
Æ
main oven does not respond to any settings. You can
still set the clock and the timer when the childproof lock is
activated.
If the heating type and temperature or grill setting are set, the
childproof lock interrupts the heater element.
Switching on the childproof lock
No cooking time or end time may be set.
Press and hold the
h
button for approximately 4 seconds.
The
@
symbol appears in the display. The childproof lock is
activated.
Switching off the childproof lock
Press and hold the
h
button for approximately 4 seconds.
The
@
symbol in the display goes out. The childproof lock is
deactivated.
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
No other time-setting option should have been set.
1.
Press and hold the
0
button for approx. 4 seconds.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
2.
Use the
@
or
A
button to change the basic setting.
3.
Confirm by pressing the
0
button.
The next basic setting appears in the display. You can scroll
through all levels with the
0
button and change the setting
with the
@
or
A
button.
4.
To finish, press and hold the
0
button for approx. 4 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Basic setting
Selection 1 Selection 2 Selection 3
c1
Clock display
always*
only with
the
0
but-
ton
-
c2
Signal duration
upon completion of
a cooking time or
timer period
approx.
10 seconds
approx.
2 minutes*
approx.
5 minutes
c3
Waiting time until a
setting is applied
approx.
2 seconds
approx.
5 seconds*
approx.
10 seconds
* Factory setting
