Siemens HB373AB.0, Инструкция по эксплуатации

Страница: 15 / 40

Child lock NL
Depending on the button you touch first, the alarm time
starts at a different suggested value: 5 minutes at the .
button
a
and 10 minutes at the @ button.
To deactivate it, press the ' button again for approx. 4
seconds until the symbol disappears from the display.
1.
on test
v
touch to the alarm clock symbol
Q
is marked.
2.
With key
a
or @ set the alarm time. The
alarm time starts after a few seconds.
Q Basic settings
Tip: If the set alarm time applies to the running time of
the device, use the duration. The device then switches
off automatically.
Bas isi ns t el li ngen
Various settings are available to operate your
device optimally and easily. You can now change these
settings to your liking:
Alarm clock has ended
A signal sounds. The display shows the alarm time at
zero.
List of basic settings
Switch off the alarm with any key.
Depending on the version of your device, not all basic
settings are available.
Change and abort
Basic setting
Choise
With key
a
or @ you can change the alarm time at any
time. The change is accepted after a few seconds.
™‚
Signal duration after expiry
= approx. 10 seconds
of a time duration or alarm clock
=
approx. 30 seconds*
time
„ = approx. 2 minutes
To cancel the programme, set with the
a
the alarm
time all the way back to zero. The alarm clock is turned
off.
™ƒ
Waiting time until a setting =
approx. 3 seconds*
ling has been taken over
=
approx. 6 seconds
„ = approx. 10 seconds
Change time
™„
Key signal when tapping
=
out
of a test
=
at*
You can change the time again if necessary, eg from summer to
winter time.
™…
Brightness of the display
=
dark
To do this, when the device is switched off, press the
v
until the symbol for the time is highlighted and with
the
a
or @ change the time.
lighting =
average
„ =
bright*
™†
Time indication =
time display off
=
time display on*
™‡
Activating child lock possible
=
new
=
Yes*
a Child lock
=
yes, with door
lock**
Child lock
To prevent children from accidentally switching
on the device or changing settings, it is equipped
with a child lock.
™ˆ
Interior lighting
during use
=
new
=
Yes*
Clues
™‰
Run-on time of the cooling fan
=
short tor
=
average* ■
In the basic settings you can specify whether
the Child Lock function can be set.
~" Basic settings" on page 15
A possibly connected hob is not affected because
the oven is equipped with a child lock.
„ =
long
… =
extra long
■
™Š
Telescopic rails retrofitted
=
no* (for racks and 1-
fold** pull-out system)
=
yes (with 2- and 3-way pull-
out system)
Activate and deactivate
To activate the child lock, the function
selector must be in the zero position.
™'
All values to factory
=
no* reset
setting
=
Yes
Press the ' button for approx. 4 seconds.
* Factory setting (depending on the device type, the factory
settings may differ)
The symbol for this appears on the display. The
child lock is activated.
** Not available on all devices.
Note: When there is an alarm time
V
is set, it continues
to run. The alarm time cannot be changed as long as the
child lock is active.
- - - - - - - -
15