7
Repairs
Incorrectly done repairs are dangerous.
There is a risk of electrocution.
Repairs may only be carried out by after-sales
service technicians who have been fully trained by
BSH.
If there is a fault, switch off the oven fuse at the fuse
box. Call the after-sales service.
Reasons for damage
Baking tray, aluminium foil
Do not place the baking tray on the oven floor.
or dishes on the oven floor
Do not cover it with aluminium foil.
Do not place dishes on the oven floor.
This will cause heat accumulation. The baking and
roasting times will no longer be correct and the
enamel will be damaged.
Slide-in accessories
To avoid damage, insert slide-in accessories
carefully.
Water in the oven
Never pour water directly into a hot oven.
This could damage the enamel.
Fruit juice
When baking very moist fruit cakes, do not put too
much on the baking sheet. Fruit juice dripping from
the baking sheet leaves stains that cannot be
removed.
It is recommended that you use the deeper universal
pan.
Cooling with the oven door
Only leave the oven to cool with the door closed. Do
open
not allow anything to become trapped in the oven
door. Even if you only leave the oven door open
slightly, the fronts of adjacent units may become
damaged over time.
Very dirty oven seal
If the oven seal is very dirty, the oven door will no
longer close properly when the oven is in use. The
fronts of adjacent units could be damaged. Keep the
oven seal clean.
Using the oven door as a
Do not stand or sit on the oven door.
seat
Содержание HB 56 M.50B
Страница 1: ...HB 56 M 50B Installation and Operating Instructions ...
Страница 61: ...61 Notes ...
Страница 62: ...62 Notes ...
Страница 63: ...63 Notes ...