17
Gigaset SL37H / IM1 English / A31008-M1952-R101-2-4N19 / main.fm / 20.7.10
V
e
rsion 4, 16.0
9
.2005
Opening lists with the
message key
An advisory tone sounds as soon as a
new
message
arrives in a list. The message key
f
flashes (it goes off when the key is
pressed). In
idle status
, the display shows an
icon for the new message.
If you press the message key
f
, you
access the lists that contain new messages.
Using a handset as a
room monitor
If the room monitor is activated, a previously
stored destination number is called as soon
as a set noise level is reached. You can store
an internal or external number in your hand-
set as the destination number.
The room monitor call to an external num-
ber stops after around 90 seconds. The room
monitor call to an internal number (handset)
stops after approx. 3 minutes (depending on
the base station). While the room monitor is
activated, all keys are locked except the end
call key. The handset's speaker is muted.
When the room monitor is activated, inco-
ming calls to the handset are indicated
without a ringer tone
and are only shown
on the screen. The display and keypad are
not illuminated and advisory tones are also
turned off.
If you accept an incoming call, the room
monitor mode is suspended for the duration
of the call, but the function
remains
activated.
The room monitor mode is retained if you
turn the handset off and on again.
Activating the room monitor and
entering the destination number
v
¢
í
¢
Room Monitor
¤
Change multiple line input:
Room M.:
Select
On
to activate.
Call to:
External number:
Select the number
from the directory (press display key
Ò
) or enter it directly. Only
the last
4 digits
are displayed.
Internal number:
§Options§
¢
INT
¢
§OK§
¢
s
(select handset or
Call All
if all
registered handsets are to be called)
¢
§OK§
.
Level:
Set noise level sensitivity (
Low
or
High
).
¤
Press
§Save§
to save the settings.
Changing set destination numbers
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
X
or
§Delete§
Delete existing number.
¤
Enter and save number as described in
"Activating the room monitor and ente-
ring the destination number" (
Caution!
–
You should always check the operation of
the room monitor before use. For example,
test its sensitivity. Check the connection if
you are diverting the room monitor to an
outside number.
– When the function is switched on the hand-
set's operating time is severely reduced.
If necessary, place the handset in the char-
ging cradle. This ensures that the batteries do
not run down.
– Ideally the handset should be positioned 1 to
2 metres away from the baby. The micro-
phone must be directed towards the baby.
– The connection to which the room monitor is
diverted must not be blocked by an activated
answer machine.
