33
Quick Start Guide
Gigaset SX686 WiMAX / de-en / A31008-N919-R101-2-ZD43_22-10-2008 / qig_SX686_685.fm / 23.10.2008
Te
m
plat
e 2004
_12
_27
ì
Enter the account data you received from your Internet service provider.
ì
Leave the default settings for further parameters unless your service provider has
provided you with other data.
ì
Click
Test Settings
to check the Internet connection.
An attempt is made to set up an Internet connection. The result is shown in a window.
If the connection could be set up successfully, the
Close
button appears.
ì
Click the
Close
button to return to the
Basic Setup Wizard
.
ì
To go to the next step, click
Next >
.
Telephony
You can perform the initial configuration of your Internet telephony account on this
screen.
ì
Select the option
On
for
VoIP account
if you wish to use Internet telephony (default
setting).
ì
Select
Other
from the
Service provider
selection menu (default setting) or, if
required, use one of the suggested providers from the list.
ì
Enter the data you have received from your service provider.
ì
If you wish to delete the entered data, click the
Clear
button.
ì
Confirm your selection with
Next >
.
WPS Registration
Wi-Fi Protected Setup (WPS) makes it easier to establish a wireless network. Devices
equipped with WPS can create and synchronise an SSID and a WPA key (pre-shared key)
automatically (see page 28).
ì
Click
Register
to start WPS registration.
Once WPS registration is activated, the device searches for a WPS client within range.
Any WPS client within range that activates the WPS function during the two-minute
interval receives the Gigaset SX686 WiMAX security data (SSID and pre-shared key) and
is thereby registered. The registration progress is shown in the window. You can repeat
these steps for each WLAN client to be registered. Only one client may register during
the two-minute interval. If two clients try to regsister at the same time, the registration
will be broken down and an error message appears.
ì
To go to the next step, click
Next >
