120
Operating with other devices
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005
Operating with other devices
On your base station, you can register up to eight cordless devices (including
Gigaset data modules (page 136) and Gigaset Repeater (page 135)).
You must initiate registration of a cordless device on the base station and on the
cordless device itself. The internal numbers 11 to 18 are reserved for the cordless
devices. If these internal numbers have already been assigned on your telephone, de-
register a handset you no longer require before registering a new one (page 126).
On the Gigaset SX303isdn/SX353isdn, you can also operate an analogue device
(page 9, page 129), a PC via the USB connection on the base station (page 9, page 136)
and a Bluetooth device (page 126).
Registering handsets
When you have prepared the base station for registration, it remains so for approx.
60 seconds. Therefore you should prepare the handset for registration before starting
preparation of the base station.
1. On the base station
The base station is only ready for registration for as long as
Registration
proced.running
is shown in the display (approx. 60 seconds).
2. On the handset (within 60 sec.)
Register the handset as described in the relevant operating instructions.
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
The next unassigned internal number between
Int.11
and
Int.18
is automatically
assigned to the handset as it is registered.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
s
Setup user
Select the menu item and confirm.
s
Register device
Select the menu item and confirm.
OK
OK
OK
OK
i
If the handset terminates the base search, e.g. because the registration
time has been exceeded, repeat the process.
