Siemens Gigaset SL1 professional, Руководство пользователя

Страница: 49 / 236

16
Using the directory and other lists
Gigaset SL1 / englisch / A31008-L001-B002-1-6Z19 / start_guide_time.fm / 14.11.2003
Sending a single entry or complete list to a handset
You can send individual entries or the entire list to another SL 1, S1 or C2 handset or a
Comfort handset in the Gigaset 4000, 3000 or 2000 series that is registered to the same
base. Stored voice patterns and speed dial numbers are not sent. The VIP settings are
sent depending on the handset.
s
or
C
(open directory/speed dial list);
s
(select entry);
v
(open menu);
s
Copy Entry
or
s
Copy List
);
~
(enter the internal number of the receiving handset); .
You can select further entries provided you confirm with the display key
Yes
after you
have sent an entry. Select
No
to stop sending.
Voice-activated dialling
With voice-activated dialling, you dial simply by speaking the name of the person you
wish to call. To do this, you must first store a voice pattern, i.e. the name which you
speak will be stored in the handset.
Up to four users can store/record a voice pattern per entry. Before he records a voice
pattern, the user must "identify" himself, e.g. as
User 2
.
A maximum of 23 voice patterns can be stored for directory entries. An entry stored
with a voice pattern is indicated by
´
in the voice directory.
Recording a voice pattern for an existing directory entry
Record your voice pattern in quiet surroundings (holding the handset about 25 cm
away).
Step 1: Open the directory for voice-activated dialling:
s
(open directory);
s
(select entry);
View
;
s
User 2
(example) .
Step 2: Begin recording:
record
; (Confirm the display prompt). Speak the name when prompted to do so by
the display. Repeat the name when prompted again to do so. Your recording is stored
automatically.
Press
a
and hold (return to idle status).
A message tells you if your speech pattern is too much like another user's. Close this
message with , go back to the start of the voice pattern recording sequence and
repeat the recording.
Using voice-activated dialling: Press
t
and hold and speak the name.
Phone announces the caller's name
When you receive an external call, you hear the ringer and the telephone announces the
caller's name.
Preconditions: Calling Line Identification. A voice pattern is stored (page 16).
Activating/deactivating the name announcement
v
(open menu);
s
Audio Settings
;
s
Ringer Settings
;
Ext. Calls
;
2x
s
(to the next-but-one line); activate/deactivate
r
(
Announce
);
Save
;
press
a
and hold (return to idle status).
OK OK
OK
OK
OK
Ý
OK
OK OK