70
Setting the base
Gigaset S790-S795 / en Großbritannien / A31008-M2102-L101-2-7619 / registr_sett.fm / 29.03.2010
V
e
rsion 4.1, 21
.11.2007
Protecting against
unauthorised access
Protect the system settings of the base with
a PIN known only to yourself. The system PIN
must be entered when, for example, regis-
tering/de-registering a handset to/from the
base or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting:
0000
) to a 4-digit
PIN known only by you.
Gigaset S795: Setting a system PIN facilitates
remote operation of the answering machine
(
v
¢
Ï
¢
System
¢
System PIN
~
Enter the current system PIN
and press
§OK§
.
~
Enter your new system PIN and
press
§OK§
.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code
0000
:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to
0000
.
Resetting the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode
is activated and
Eco Mode+
is
deactivated,
u
The system PIN is not reset.
v
¢
Ï
¢
System
¢
Base Reset
~
Enter the system PIN and
press
§OK§
.
§Yes§
Press the display key.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the factory settings.
•
•