Siemens Gigaset S685 IP Скачать руководство пользователя страница 111

Страница: 111 / 278

109

Info Center – with the handset always online

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / Info_Center.fm / 5/18/09

ion 8,

.09

.200

Messages when loading requested information

The information is loaded from the Internet. Wait a few seconds until the infor-

mation is displayed. The display shows

Please wait

If the information for an info service cannot be displayed, one of the following

messages appears:

Requested page can’t be reached.

Possible causes of this are:

Time limit exceeded (timeout) when loading the information, or

the Internet server for the info services cannot be accessed.

Check your Internet connection and repeat the request at a later time.

Coding error on requested page

The content of the requested info service is coded in a format which the hand-

set cannot display.

Can’t display requested page

General error when loading the info service.

Login failed.

Registration has failed. Possible causes of this are:

You have not entered your registration data correctly.

Reselect the info service and repeat the registration process.

Please remember that data is case sensitive.

You are not entitled to access this info service.

Registration for personalised info services

If a special registration with user name and password is required to access an

info service, the following is displayed after the service has been called up:

Username

Enter the user name supplied by the provider of the info service.

Password

Enter the password associated with this user name.

§Save§

Press the display key to send the registration data.

If registration was successful, the requested info service is displayed.

If registration failed, a message to this effect appears on the display

Messages when loading requested information

Page 109

Login

Username:

Password:

Save

Содержание Gigaset S685 IP























































































































































































































































































Результаты поиска

Содержание Gigaset S685 IP

Отзывы:

Похожие инструкции для Gigaset S685 IP

Бренды по названию

Популярные бренды

Siemens Gigaset S685 IP, Руководство пользователя

Результаты поиска

Содержание Gigaset S685 IP

Отзывы:

Похожие инструкции для Gigaset S685 IP

Бренды по названию

Популярные бренды