84
Web configurator
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / web_server.fm / 28.3.07
Ve
rs
ion 4,
16
.09.
2005
The list will show the following:
Name
Name of the connection. This will show
the name that you have defined for the
connection (page 85, page 89) or the
default name (
IP 1
to
IP6
for VoIP con-
nections,
Fixed Line
for fixed network
connections).
Status
The status of the connection will be
shown for VoIP connections:
registered
The connection is activated. The phone
has been successfully registered. You
can use the connection to make calls.
Disabled
The connection is deactivated. The
phone is not registering with the corre-
sponding account with the VoIP serv-
ice. You can not use the connection to
make or receive calls.
Registration failed
/
Server not accessible
(Examples)
The phone could not be registered with
the VoIP service, e.g. because the VoIP
access data is incomplete or incorrect,
or because the phone is not connected
to the Internet. There is information
about this in the section entitled "Ques-
tions and answers" from page 102.
Active
You can use the option in the
Active
col-
umn to activate (
½
) and deactivate (
Õ
)
VoIP connections. If a connection is
deactivated, the phone will not register
for this connection. The connection can
be activated/deactivated by clicking
directly on the option. The change does
not need to be saved.
To configure a connection or to change
the configuration of a connection:
¤
Click on the
Edit
button behind the con-
nection.
This will open a Web page where you can
make the settings needed. Read on:
u
in the section "Configuring the VoIP
u
in the section "Configuring the fixed
network connection" on page 89
Configuring the VoIP connection
Open the Web page:
¤
Open the following Web page:
Settings
¢
Telephony
¢
Connections
.
¤
Click on the
Edit
button behind the VoIP
connection that you want to configure
or whose configuration you want to
change.
This will open a Web page where you can
make the settings that your phone needs
to access your provider's VoIP server.
The Web page always displays the follow-
ing areas:
u
IP Connection
u
Personal Provider Data
and (page 85)
u
Call Forwarding
The areas
u
u
Network
can be shown and hidden by clicking on
the buttons
Show Advanced Settings
and
Hide Advanced Settings
.
You must enter the VoIP provider's general
access data in these areas. You can down-
load the general access data for many VoIP
providers from the Internet (page 89).
¤
Make the settings on the Web page.
¤
Save them in the phone, see page 88.
¤
Active the connection if necessary, see