74
Using several handsets
Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / T-NetBox_SAG-registration.fm / 28.3.07
Ve
rs
ion 4,
16
.09.
2005
Changing a handset's internal
number
A handset is
automatically
assigned the
lowest free number on registration. In the
list of internal subscribers, the handset is
sorted according to its internal number.
You can change the internal number of all
registered handsets (1–6). Numbers 1–6
can only be assigned once each.
u
Open list of handsets. Your
own handset is indicated by
<
.
§Options§
Press the display key.
Edit H/Set No.
Select and press
§OK§
. The list of
handsets and their internal
numbers will be displayed.
The internal number for the
first handset flashes.
q
Select handset.
~
Enter the new internal number
(1–6). The handset's old
number is overwritten.
q ~
If necessary, select further
handsets and change num-
bers.
After all the changes are completed:
§Save§
Press the display key to save
the input.
a
Press
and
hold
(idle status).
You will hear the error tone if an internal
number has been allocated twice.
¤
Repeat the procedure with a free
number.
Changing the name of a handset
The names "
INT 1
", "
INT 2"
etc. are assigned
automatically at registration. You can
change these names. The changed name
is displayed in every handset's list.
u
Open list of handsets. Your
own handset is indicated by
<
.
s
Select handset.
§Edit§
Press the display key.
X
Delete previous name if neces-
sary.
~
Enter the new name
(max. 10 characters).
§Save§
Press the display key.
a
Press
and
hold
(idle status).
Making internal calls
Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u
Initiate internal call.
~
Enter the number of the hand-
set.
Or:
u
Initiate internal call.
s
Select
handset.
c
Press the talk key.
Calling all handsets ("group call")
u
Initiate internal call.
*
Press the star key. All handsets
are called.
Ending a call
a
Press the end call key.
Please note:
If you delete the current handset name and
then press
§Save§
without entering a new name,
the handset will automatically be allocated the
standard name "INT x" (x= internal number).