7
First steps
Gigaset E49H / IM1 eng / A31008-M2154-R101-1-4N19 / starting.fm / 14.09.2010
V
e
rsion 4.1, 21
.11.2007
Setting up the handset for use
The display and control key are protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
Warning
Only use the rechargeable batteries (
¢
page 36) recommended by Gigaset
Communications GmbH. Never use conventional (non-rechargeable) batteries,
as this could result in significant health risks and damage to property. For exam-
ple, the outer casing of the batteries could be destroyed or the batteries could
explode. The phone could also malfunction or be damaged as a result of using
batteries that are not of the recommended type.
¤
Insert the batteries the right way round.
The polarity is indicated in/on the bat-
tery compartment.
¤
Hold the battery cover at a slight
angle and push it onto the casing,
bottom first
a
.
¤
Then press the cover
b
until it
clicks into place.
a
b
¤
Insert the lock ring or belt clip into
the battery cover as illustrated
(rotated by approx. 20°). In the
case of the lock ring, pay attention
to the arrow markings.
¤
Turn the lock ring or belt clip
clockwise to the end stop.
When the markings on the ring
and cover are aligned, the lock
ring is closed.
www.InternetVoipPhone.co.uk | [email protected] | 0800 088 4846
