
49
Appendix
Gigaset E455 / IM-MEA EN / A31008-M1718-A601-1-7619 / appendix.fm / 03.12.2008
The other party cannot hear you.
You have pressed the
u
(INT) key. The hand-
set is "muted".
¥
Switch on the microphone again (page 12).
The incoming call number is not displayed
although CLIP is set
.
Phone number identification is not enabled.
¥
Caller
should ask network provider to acti-
vate phone number identification (CLI).
You hear an error tone when keying an input
(a descending sequence of tones).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the operating
instructions if necessary.
You cannot listen to messages on the net-
work mailbox
.
Your phone system is set for pulse dialling.
¥
Set your phone system to tone dialling.
The calls list does not indicate a time for a
message.
Date/time are not set.
¥
Set the date/time (page 8).
The answering machine reports "PIN is incor-
rect" during remote operation.
1. System PIN entered is incorrect
¥
Repeat input of system PIN,
2. System PIN is still set to 0000.
¥
Change system PIN to a number other
than 0000 (page 46).
The answering machine does not record any
messages/has switched over to 'announce
only'.
Its memory is full.
¥
Delete old messages.
¥
Play back new messages and delete.