Siemens Gigaset E45, Руководство пользователя

Страница: 15 / 34

15
Using a handset as a room monitor
Gigaset E45 / USA EN / A31008-M1751-R101-2-6Z19 / start_guide_time.fm / 30.3.06
Activating the room monitor and
entering the number to be called
v
¢
í
¢
Room Monitor
¤
Change multiple line input:
Room M.:
Select On to activate.
Call to:
Press the display key
§Edit§
and enter des-
tination number.
External number: select number from
the directory or enter directly. Only the
last 4 digits are displayed.
Internal number: delete any stored
external number.
§INT§
s
(select hand-
set or Call All , if all registered handsets
are to be called)
§OK§
.
Store number with
Save
.
Level:
Set noise level sensitivity ( Low or High ).
¤
Save changes (page 27).
The function is now activated. With
v
,
you can move directly to settings.
Changing previously set external
destination number
v
¢
í
¢
Room Monitor
s
Scroll to the Call to: line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 15).
¤
Save changes (page 27).
Changing previously set
external destination number
v
¢
í
¢
Room Monitor
s
Scroll to the Call to: line.
§Edit§
Press the display key.
§Yes§
Press the display key to
confirm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 15).
¤
Save changes (page 27).
Deactivating the room monitor
remotely
Requirements : The phone must support
touch tone dialing and the room monitor
must be set to an external destination
number.
¤
Take the call from the room monitor
and press keys
9 ;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (such as no
ringtone) will however remain activated
until you press the display key
§Off§
on the
handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
Save
(page 15).
Caution:
– You should always check the operation
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
– When the function is switched on, the
handset's operating time is severely
reduced. If necessary, place the handset in
the charging cradle. This ensures that the
battery pack will not run down.
– Ideally the handset should be positioned
1 to 2 meters away from the sound being
monitored. The microphone must be
directed towards the monitored sound.
– The connection to which the room monitor
is diverted must not be blocked by an acti-
vated answering machine.