5
First steps
Gigaset E360 / SEA / A31008-M1805-Y701-1-7619 / starting.fm / 17.03.2010
V
e
rsion 4, 16.0
9
.2005
Connecting the base station
¤
First
connect the mains adapter and
then
the phone jack as shown below and place
the phone cord in the cord recess.
1 Underside of the base (section)
2 Mains adapter 230 V
3 Phone jack with phone cord
Please remember:
u
Keep the mains adapter
plugged in at all
times
for operation as the phone does not
work without mains connection.
u
If you buy a replacement phone cord
from a store ensure that the phone jack is
connected correctly.
Setting up the handset for
use
Fitting the batteries and closing
the cover
¤
Fit the batteries with the correct polarity
(see diagram).
The polarity is indicated in the battery com-
partment.
¤
First align the notches on the side of the
battery cover with the protrusions of the
inside of the casing.
¤
Then press down the cover so that it
clicks into place.
Correct phone jack assignment
1 unused
2 unused
3 a
4 b
5 unused
6 unused
1
3
2
1
1
1
3
2
1
4
5
6
Caution:
Use only the rechargeable batteries recom-
mended by Gigaset Communications GmbH on
page 24. In other words, never use a conven-
tional (non-rechargeable) battery or other bat-
tery types as this could result in significant health
risks and personal injury. For example, the outer
casing of the batteries or accumulators could be
destroyed or the batteries could explode. The
phone could also malfunction or be damaged as
a result of using batteries that are not of the rec-
ommended type.
