42
Operating the base answering machine
DL500A/DX600A-ISDN/DX800A / GRC EN / A31008-N3101-T101-1-8U43 / answering_m.fm / 27.10.10
V
e
rsion 4, 16.0
9
.2005
Operating the base
answering machine
You can operate the answering machine that
is integrated into the base using the keys on
the base (
a registered Gigaset SL78H, SL400H or S79H
handset or by remote operation (other
phone/mobile phone). You can only record
your own announcement message or advi-
sory message via the base or a handset.
v
¢
Ì
¢
Announcements
Gigaset DX800A all in one, DX600A ISDN
Each of the devices has three answering
machines (AM1, AM2, AM3), which can be
activated and used independently of each
other.
Once the base has been set up, AM1 is acti-
vated and all base connections are assigned
to it as receive connections. AM2 and AM3
are available once you have assigned at least
one receive connection to them
(
Each answering machine only receives calls
that are directed to its receive connections.
Each answering machine can only be oper-
ated via the end devices (base/handsets) to
which at least one of the machine's receive
connections is assigned.
Operating via the base
The speaker activates
automatically
if you
receive an acoustic prompt or message
while operating. You can deactivate the
handsfree mode by picking up the receiver.
Operation via the menu on the base is
the same as operation via a registered
Gigaset SL78H, SL400H or S79H handset.
Activating/deactivating and
setting answering machine mode
You can choose between
Answer & Record
,
Answer only
and
Alternating
. By using the
Alternating
setting, you can activate answer
and record mode for a set period of time;
outside this period the caller will only hear
the announcement.
v
¢
Ì
¢
Activation
(
μ
= on)
q
If necessary, select an answering
machine.
§Change§
Press the display key.
¤
You can enter data in the following fields:
Activation:
Select
On
or
Off
to activate/deactivate
the answering machine.
Mode:
Select
Answer & Record
,
Answer only
or
Alternating
.
For
Alternating
:
Record from:/Record until:
Enter the start and end of the period in
4-digit format (time
must
be set).
Enter hours/minutes for the end of the
period in 4-digit format.
§Save§
Press the display key.
