C470 IP KBA / GRC EN / A31008-M1916-T101-2-8U43 / configuration_6pg.fm / 2/23/09
Ve
rs
io
n 5,
23
.0
9.
20
08
9
Saving VoIP access data
Precondition for the following steps:
Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network
or the mobile phone network, you need a VoIP account.
>
Set up a VoIP account with a VoIP provider.
>
Have the VoIP account data you received from your VoIP provider to hand.
You will need:
>
Your registration name (login ID), your password and, if applicable (provider-dependent),
a user name (often this is your VoIP phone number).
Or
>
Your personal auto-configuration code (activation code), if your provider supports
"automatic configuration".
Starting the configuration process
When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the
charging cradle), the message key
f
on the handset flashes.
Instead of using the following procedure, you can also enter the VoIP access data using your
PC (steps
to
)
:
>
Launch the Web browser on your PC.
>
Enter the URL
http://www.Gigaset-config.com
in the address field of the Web browser
and press the return key.
You are connected to your base station's Web configurator. You will find a description of this
in the user guide on the enclosed CD.
>
Press the message key
f
on the handset.
If "Update firmware?" is shown in the display, updated firmware is already available for your
phone. Press the right-hand display key
§Yes§
. The new firmware is loaded. This takes approx.
3 minutes. The message key
f
will now flash again.
>
Press the message key
f
to start configuration.
7
11
7
