30
Using several handsets
Gigaset C350 / GBR / A31008-M1621-L161-1-7619 / registration.fm / 19.1.05
Changing a handset's
internal number
A handset is
automatically
allocated the
lowest available number when it is regis-
tered. If all of the numbers have been allo-
cated, then number 6 is overwritten if this
handset is in idle status. You can change
the internal number of all registered hand-
sets (1–6).
INT
Open list of internal users.
s
Select handset.
§Menu§
Press the control key.
s
Select
Edit Handset Number
.
~
Enter a number.
§OK§
Press the control key.
a
Press
and
hold
(idle status).
You will hear the error tone if an internal
number has been allocated twice.
¤
Repeat the process with an available
number.
Using a handset as a
room monitor
With this function, a previously stored
internal or external number is called when
a set noise level in the room is reached.
The room monitor call to an external
number stops after approx. 90 seconds.
The room monitor call to an internal
number (handset) stops after approx. 3
minutes (depending on the base).
During the call, all keys are locked except
the end call key. The room monitor
function
remains
active
after you end the
call. It must be activated again if the hand-
set has been switched off.
When the room monitor function is active,
incoming calls to the handset are indi-
cated
without a ring tone
and only
appear on the display. The display and
keys are not illuminated and advisory
tones are also turned off.
Activating the room monitor and
entering the number to be called
§Menu§
¢
Additional Features
¢
Room
Monitor
¢
Call Internal
s
Select an
internal
handset or
Call All handsets
(if several
handsets are registered and
you wish all handsets to be
called) and press
§OK§
.
The function is now activated. An
internal
handset will be called.
Or:
§Menu§
¢
Additional Features
¢
Room
Monitor
¢
Call External
~
Enter the number of an
exter-
nal
phone and press
§OK§
.
The function is now activated. An
exter-
nal
number will be called.
Setting the sensitivity
§Menu§
¢
Additional Features
¢
Room
Monitor
¢
Level
s
Choose between
Low
and
High
and press
§OK§
.
Note:
– The connection to which the room monitor
is diverted must not be blocked by an acti-
vated answering machine.
– Ideally the handset should be positioned 1
to 2 metres away from the baby. The micro-
phone must be directed towards the baby.
–
You should always check the operation
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
– If you answer an incoming call this will
interrupt the room monitor.
– The active room monitor function consider-
ably reduces the operating time of the
handset. Place the handset in the base if
necessary. This ensures that the battery
does not discharge.