AS280-AS285 / AUS / A31008-M2042-C401-1-7619 / Version 4, / starting.fm / 20.08.2010
6
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls, and
so that the alarm can be used.
MENU
¢
Settings
¢
OK
¢
Date/Time
¢
OK
¢
Date:
¢
~
(enter the day, month and year in 6-digit format)
¢
OK
¢
Time:
¢
~
(enter hours and minutes in 4-digit format)
¢
OK
(display message:
Saved
)
¢
a
(press and
hold
to return to idle status)
Display in idle status
Once the phone is registered and the time set,
the idle display is shown as in this example.
If the answer machine is activated (AS285), the answer
machine icon
×
will be displayed in the header. Your
answer machine is set with a pre-recorded announcement.
Activating/deactivating the handset
Press and
hold
the end call key
a
to activate or deactivate
the handset.
If you place a deactivated handset in the base station or charging cradle, it will automatically
activate.
Your phone is now ready for use!
If you have any questions about using your phone, please read the tips on troubleshooting
("Questions and answers"
page 12) or contact our Customer Care team page 13.
Please note
◆
After the first battery charge
and
discharge you may replace your handset in the base
station or charging cradle after every call.
◆
Always repeat the charging and discharging procedure if you remove the batteries
from the handset and reinsert them.
◆
The batteries may warm up during charging. This is not dangerous.
◆
After a while, the charge capacity of the batteries will decrease for technical reasons.
Please note
When entering the time and date, you can move the position of an entry to the left or right
by pressing the control button up or down.
±
V
11.12.
11:56
INT
MENU
