Siemens Gigaset AS200, Руководство пользователя

Страница: 10 / 24

10
AS200-AS200A-AS300 / IRL / A31008-M2208-V101-1-7619 / main.fm / 02.11.2010
Deleting individual messages
While playback is paused, press the
˜
display key.
Deleting all old messages
During playback or pause:
MENU
¢
Delete all old
¢
OK
(confirm the security
prompt)
Picking up a call from the answer machine
You can still accept a call while the answer machine is
recording the message by pressing
c
. Recording
stops and you can speak to the caller.
Setting up the answer machine
The answer machine has already been preset at the
factory. Make individual settings using the handset.
Details on how to set a delay time, after which the
answer machine is to answer a call, as well as details
on how to set the recording length and activate call
screening during the recording, are available from the
Menu tree
¢
page 16.
Assigning key 1 for fast access to the
answer machine (network mailbox)
Simply press and hold key
1
on the handset and you
will be connected directly to the answer machine
(network mailbox).
See Menu tree
¢
page 16.
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Requirements:
◆
You have set a system PIN other than 0000 ¢
page 17.
◆
The phone you are using for remote operation has
touch tone dialling (DTMF), i.e. you hear different
tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number)
¢
while listening to your
announcement: press the
9
key and enter the system
PIN
The following keys are used for operation:
Activating the answer machine
~
(Enter your own number and allow the phone to ring
until you hear the message: "Please enter PIN")
¢
~
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deacti-
vated remotely.
Locating a handset
("paging")
You can locate your handset using the base station.
◆
Briefly press the registration/paging key on the
base station (
¢
page 1).
◆
All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
End paging: briefly press the registration/paging key
on the base station (
¢
page 1) or the talk key
c
on
a handset.
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset AS200/AS300) recommended).
For automatic registration of handsets to
Gigaset AS200/AS200A/AS300 ¢
page 5.
Manual registration of handsets to
Gigaset AS200/AS200A/AS300
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting the
base station to its default settings.
This will also reset
other settings
¢
page 12 .
If you have only registered handsets for other GAP-
compatible devices, these can only be de-registered
with a
hardware reset
¢
page 12.
A
Go to the start of the current message.
Press twice to go back to the previous mes-
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
delete current message.
Please note:
Each
additional handset must be registered on the
base station in order for it to work properly!
1. On the handset
MENU
¢
Settings
¢
OK
¢
Handset
¢
OK
¢
Register HS
¢
Enter the system PIN of the base
station (default is 0000)
¢
OK
.
Registering flashes in the display
.
2. On the base station
Within 60 seconds of entering the system PIN, press
and hold the registration/paging key (
¢
page 1)
(min. 3 seconds).