AS180 DUO / Singapur EN / A31008-M2002-Z201-2-6C19 / starting.fm / 04.11.2009
6
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls,
and so that the alarm can be used.
MENU
¢
Settings
¢
OK
¢
Date/Time
¢
OK
¢
Date:
¢
~
(enter the day, month and year in 6-digit format)
¢
OK
¢
Time:
¢
~
(enter hours and minutes in 4-digit format)
¢
OK
(display message:
Saved
)
¢
a
(press and
hold
to return to idle status)
Display in idle status
Once the phone is registered and the time set,
the idle display is shown as in this example.
Activating/deactivating the handset
Press and
hold
the end call key
a
to activate or deacti-
vate the handset.
If you place a deactivated handset in the base station or
charging cradle, it will automatically activate.
Your phone is now ready for use!
If you have any questions about using your phone, please read the tips on troubleshooting
page 11) or contact our Customer Care team
Please note
◆
After the first battery charge
and
discharge you may replace your handset in the
base station or charging cradle after every call.
◆
Always repeat the charging and discharging procedure if you remove the batteries
from the handset and reinsert them.
◆
The batteries may warm up during charging. This is not dangerous.
◆
After a while, the charge capacity of the batteries will decrease for technical rea-
sons.
Please note
When entering the time and date, you can move the position of an entry to the left
or right by pressing the control button up or down.
V
11.12.
11:56
INT
MENU
