Siemens Gigaset A580, Руководство пользователя, Страница: 89 / 197

88
Setting the base station via the handset
Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 28.04.2009
Ve
rs
ion 8,
03
.09
.200
8
Prerequisite:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed line network or VoIP.
u There is no internal connection between registered handsets or to GHC
devices.
u No other handset has opened the base station menu.
Starting the firmware update manually
§Menu§
¢
Settings
¢
Base
Firmware Update
Select and press
§OK§
.
~
Enter the system PIN and press
§OK§
.
The base station is connected to the Internet.
§Yes§
Press the Display key to start the firmware update.
Automatic firmware update
Your phone will check daily whether a more recent firmware version is available
on the Gigaset configuration server on the Internet. If this is the case, the mes-
sage New firmware available is displayed when the handset is in idle status, and
the Message key
f
flashes.
f
Press the Message key.
§Yes§
Press the Display key to confirm the prompt.
The firmware will be loaded onto your phone.
If you respond to the prompt with
§No§
, the handset changes to idle status. Your
phone will then remind you again about the firmware update at a later date
( New firmware available is displayed again). However, you can also carry out a
firmware update manually (
£
Page 88 ).
ú
You can deactivate the automatic version check via the Web configurator
(
£
Page 138 ).
Please note
u The firmware update can last up to 3 minutes.
u When updating from the Internet, checks are made to ensure that no newer
version of the firmware exists. If this is not the case, the operation is termi-
nated and a message is issued to that effect.
Please note
If the telephone is not connected to the Internet at the time when the check
for new firmware is to be carried out (e.g. because the router is deactivated),
the check is carried out as soon as the phone is reconnected to the Internet.