Siemens Gigaset A580 Скачать руководство пользователя страница 145

Страница: 145 / 197

144

Getting help with your phone

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 28.04.2009

ion 8,

.09

.200

No firmware update or VoIP profile download is carried out.

1. If

Not possible, try later.

is displayed, the VoIP connections may be busy or a download/

update is already being carried out.

Repeat the process at a later time.

2. If

File corrupt

is displayed, the firmware or profile file may be invalid.

Please only use firmware and downloads that are available on the preconfigured

Gigaset configuration server (

Page 137

) or at

www.gigaset.com/customercare.

3. If

Server not

available is displayed, the download server may not be accessible.

The server is currently not accessible. Repeat the process at a later time.

You have changed the preconfigured server address (

Page 137

). Correct the

address. If necessary, reset the base station.

4. If

Transmission error

XXX

is displayed, an error has occurred during the transmission of

the file. An HTTP error code is displayed for XXX.

Repeat the process. If the error occurs again, consult the Service department.

5. If

Check IP settings.

is displayed, your phone may not be connected to the Internet.

Check the cable connections between the phone and router and between the

router and the Internet.

Check whether the phone is connected to the LAN, i.e. it can be reached at its IP

address.

You cannot listen to or control a network mailbox.

VoIP:
Your VoIP provider does not support the type of DTMF signaling set up on your phone.

Ask your VoIP provider which signaling it supports and change the settings on your

phone (

Page 126

) if necessary.

When operating the base station within a PABX:
Your PABX is set for dial pulsing.

Set your PABX to touch tone dialing.

No time is specified for a message in the Calls list.

Date and time have not been set.

Set date/time (

Page 14

) or

Activate base station synchronization with a time server on the Internet

(

Page 139

Содержание Gigaset A580






































































































































































































Результаты поиска

Содержание Gigaset A580

Отзывы:

Siemens Gigaset A580, Руководство пользователя, Страница: 145 / 197

Результаты поиска

Содержание Gigaset A580

Отзывы: