14
Appendix
Verizon 100H / CAN en / A31008-M1962-R401-1-5819 / registr_sett_app.fm / 30.6.09
Changing the ring tone volume during an
incoming call
q
Press the key until the ring
tone volume reaches the
desired level.
Activating/deactivating the ring tone
You can deactivate the ring tone on your
handset before you answer a call or when
the handset is in idle status; the ring tone
can be deactivated permanently or just for
the current call.
Deactivating the ring tone permanently
*
Press and hold the star key
until you no longer hear the
ring tone.
The
Å
icon appears in the display.
Reactivating the ring tone
*
Press and
hold
the star key.
Deactivating the ring tone for the current
call
§Quiet§
Press the display key.
Deactivating the ring tone during incoming
call
s
Press key until you do not hear
the ring tone any more.
Activating the ring tone during incoming
call
t
Press key until ring tone vol-
ume reaches the desired level.
Activating/deactivating the
key-touch tone
Each key press is acknowledged by a beep.
You can deactivate this function:
§Menu§
¢
Settings
¢
Audio Settings
¢
Key
Touch Tone
¢
On
/
Off
Appendix
Care
Wipe the handset with a
damp
cloth (do
not use solvents) or an antistatic cloth.
Never
use a dry cloth. This can cause
static.
Contact with liquid
If the handset has come into contact with
liquid:
1.
Immediately switch the handset off
and remove the batteries.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the hand-
set, with the battery compartment
open and the keypad facing down, in a
dry, warm place
for at least 72 hours
(not in a microwave oven, convection
oven, etc.).
4. Do not switch on the handset again
until it has completely dried.
When it has fully dried, you should be able
to use it again normally.
Questions and answers
If you have any questions about the use of
your telephone, you can contact us at any
time at
http://www.gigaset.com
The troubleshooting section below
(page 15) contains a list of common prob-
lems and possible solutions.
!
