Gigaset S675IP / IM Nord eng / A31008-M1915-R201-2-PG43 / install_3pg.fm / 11/22/07
Ve
rs
ion 4,
16
.09.
2005
6
Preparing the handset
Inserting the supplied batteries and closing the battery cover
Connecting the charging cradle and charging the batteries
>
Check the polarity when inserting the batteries
(see symbols in or on the battery compart-
ment).
>
Only use the recommended rechargeable bat-
teries.
Once the batteries have been inserted, the hand-
set turns on automatically.
>
First, align the notches on the side
of the battery cover with the
protrusions on the inside of the
housing.
>
Then press the cover until it clicks
into place.
>
The display is protected by a plastic film. Please remove the protective film!
>
Place the handset in the charging cradle and
wait until the batteries are fully charged.
>
Do not put the handset back in the
charging cradle until the batteries are
fully discharged through use.
>
After the first battery charge
and
discharge, replace your handset in the
charging cradle after every call.
>
The battery charging status is displayed
in the idle display:
=
e
V
U
(flat to
full).
1
2
>
Observe the
sequence (A, B).
A
B
