Information
and
Communication Products
Confidential
36
ICM D CC ST
J.
Junggebauer
Version 2.1
05/01
6.9.2 Disassembling
ESD regulations have to be followed !
Needed material: suitable screw driver with cross recess
Unscrew the 5 screws on the lower case shell.
Lift lower case shell.
The loudspeaker of 4015 Classic is fixed with 2 snap hooks.
In order to get it out insert a screwdriver in the loudspeaker part of the hook and
press the plastic part of the base station to disengage the hook. Then lift the
loudspeaker and get with the screwdriver between both plastic parts of the other
hook and turn it to disengage the hook. Then take out the loudspeaker.
6.9.3 Assembling
ESD regulations have to be followed !
Needed material: suitable screw driver with cross recess
Put charger contact springs in upper case shell.
Insert board in upper case shell.
Be careful with the antenna
, because it could be
bent (or even the pad could be lifted) when it is pressed against the housing
Insert loudspeaker (only G4015 Classic).
Attach the other case shell and close the device by screwing the 5 screws in the
lower case shell.
Make sure that the charging contact springs are fixed correctly.
