Program operation
'Switch to 'Search and replace'' button
6
87 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety
2018-08-29
Search options
●
'Entire site': Search in the entire
'Site'.
●
'Selected sub-tree': Search in the highlighted subtree.
●
'Include': Search for values that have as a component the search value that
you entered in the upper right field.
●
'Exactly': Search for values that precisely match the search value that you
entered in the upper right field.
●
'Include unloaded stations': If you have checked the checkbox, then both
loaded and not loaded 'Stations' will be included in the search. See the chapter
●
'Levels down': Defines the number of levels in the tree structure that should be
searched under the marked element.
●
'Category:': Limited search within one element category. The drop-down list
contains all of the element categories, independent of the selected task card. If
you select an element category that is not present in the task card selected,
then the search will be fruitless.
●
'Default value': Search for all elements that contain the search value in the
selected meta datum or for any elements where the selected meta datum field
is empty.
●
'Any value': Search for all elements that contain the search value in the
selected meta datum or for any elements that contain any content in the
selected meta datum field.
See also
2
'Switch to 'Search and replace'' button [
6.21 'Switch to 'Search and replace'' button
The 'Switch to 'Find and replace'' button
enables the user to directly adopt a
parameter value and the matching parameter type in the 'Find and replace'
window.
Figure 19: Example: 'Switch to 'Find and replace'' button
The configuration tool shows the button next to all parameters and meta data in the
detail editor whose values can be adopted for the 'Find and replace' window.
Adopting parameter values into the 'Search and replace' window
w
The configuration tool shows the button
next to the required parameter.
1. Click on the button
next to the required parameter.
a
The configuration tool opens the 'Find and replace' window.
a
The configuration tool adopts the parameter value and parameter type into
the search field for the 'Find and replace' window.
