Building Technologies
Fire safety and security products
FDCIO181-2 Input/Output Module
Product Manual
Characteristic
l
Microprocessor-controlled signal evaluation
l
Automatic address setting, without encoder settings or DIP switch
l
2 monitored input, 2 monitored output
l
LED display of input and output status
l
Input lines monitored for open line or short circuit
l
Prevention of noise interference through intelligent analysis of input signals
l
Output lines monitored for open line or short circuit (when potential output and not activated)
l
Output monitoring configurable(on/off)
l
Control output for equipment 24 VDC, max. 2 A
l
Power supply via FD18-BUS
l
Communication with controller via FD18-BUS(detector line)
l
Directly used in dry areas. Applicable in dusty and humid areas when installed in housing
l
“
Sticker Method
”
easy for commissioning
