Siemens FCM-6S, Руководство по установке

Страница: 1 / 8

Siemens Industry, Inc.
Building Technologies Division
P/N 315-035800-2
INTRODUCTION The SIEMENS Models FCM-6S, LCM-8S and SCM-8S
are similar in appearance and identical in installation.
Models with the “S” suffix are gray in color.
The SIEMENS Model FCM-6S Control Module
(Figure 1) contains six sets of three pushbutton
switches and their corresponding LEDs. The ON and
AUTO switches both have one bi-color (red/green)
LED while the OFF switch has one bi-color and one
yellow LED. The functions of the switches and LEDs
are programmed using the Zeus Tool (Refer to the
Zeus Quick Start Guide, P/N 315-033875). All LEDs
can be programmed ON, OFF, or FLASHING. The
FCM is designed for general control requiring ON/
OFF/AUTO operation.
The SIEMENS Model LCM-8S LED Control Module
(Figure 2) contains eight pairs of LEDs. Each pair
contains one bi-color (red/green) and one yellow LED.
The functions of the LEDs are programmed using the
Zeus Tool (Refer to the Zeus Quick Start Guide, P/N
315-033875). All LEDs can be programmed ON, OFF,
or FLASHING. These LEDs are used for fire system
status annunciation.
The SIEMENS Model SCM-8S Switch Control
Module (Figure 3) contains eight switches and eight
pairs of LEDs. Each pair contains one bi-color (red/
green) and one yellow LED. The functions of the
switches and LEDs are programmed using the Zeus
Tool (Refer to the Zeus Quick Start Guide, P/N 315-
033875). All LEDs can be programmed ON, OFF, or
FLASHING. The SCM is used for manual control of
the fire system.
Figure 1
FCM-6S Control Module
Figure 2
LCM-8S LED Control
Module
Figure 3
SCM-8S Switch Control
Module
TRBL
TRBL
TRBL
TRBL
TRBL TRBL
Control Module / LED Control Module / Switch Control Module
CAN Sounder Board
Installation Instructions
Models FCM-6S / LCM-8S / SCM-8S
Model CSB