Siemens ET9 LVV1 Series, Руководство пользователя

Страница: 15 / 24

Home Connect
en
15
1.
Download the Home Connect app.
2.
Open the Home Connect app and scan the follow-
ing QR code.
3.
Follow the instructions in the Home Connect app.
14.2 Overview of the Home Connect settings
You can adjust the settings and network settings for Home Connect in the basic settings for your appliance.
Setting Selection or display Description and additional information
⁠ ⁠ – Not connected/disconnect network
– Connect automatically
– Connect manually
– Connected
Log on the appliance in the WLAN home network (Wi-Fi)
or disconnect from the network.
⁠ ⁠ – Not connected
– Connect
Connection to app
The setting is only displayed if the appliance is connec-
ted to the home network.
⁠ ⁠ – Wireless module switched off
– Wireless module switched on
Connection to the Wi-Fi
If Wi-Fi has been activated, you can use the Home Con-
nect functions.
In networked standby mode, your appliance requires
max. 2 W.
The setting is only displayed if the appliance has been
previously connected to a network.
⁠ ⁠ – Switched off
– Switched on
1
Set using the app
If the setting is switched off, only the hob's operating
statuses will be displayed in the Home Connect app.
⁠ ⁠ – Update available and ready to in-
stall
– Start installation
Software update
The setting is only displayed if a software update is avail-
able.
⁠ ⁠ – Not authorised
– Authorised
Controlling remote access by after-sales service
The setting is only displayed if after-sales service is at-
tempting to connect to the appliance. After granting ac-
cess, you can terminate this at any time.
⁠ ⁠ – Not connected to the WLAN home
network (Wi-Fi)
– Signal strength 1 (poor)
– Signal strength 2 (moderate)
– Signal strength 3 (good)
Display Wi-Fi signal strength
The setting is only displayed if there is a connection to
the WLAN home network (Wi-Fi).
⁠ ⁠ – Not connected
– Connected
Connection to Home Connect server
The setting is only displayed if there is a connection to
the WLAN home network (Wi-Fi).
1
Factory setting