Siemens ET6..NE17, Инструкция по эксплуатации

Страница: 5 / 16

5
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2 .
The control panel
Notes
■
When you touch a symbol, the respective function is
activated.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
■
Do not pull pans close to the displays and sensors. The
electronics could overheat.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to œ . The display remains lit until the hotplate has
cooled sufficiently.
"
Displays
‚
-
Š
Heat settings
•
/
œ
Residual heat
‘
Electronic boil start control
Controls
#
Main switch
r
Electronic boil start control
¹
Hotplate selection
‚
$
Childproof lock
Control panel pause
0IIIIII Settings area
Ð
or
ð
Zone connection
Controls
Hotplate Connecting and disconnecting
$
Single-circuit hotplate
ð
Dual-circuit hotplate
Select the hotplate and touch the
Ð
or
ð
symbol
î
Extended cooking zone
Select the hotplate and touch the
Ð
symbol
When the hotplate is connected: the corresponding indicator lights up. On appliances with multiple zone connection, the display
only lights up when the hotplate has been selected.
When the hotplate is switched on: the last selected size is automatically selected again