Siemens ET6 LNV1 Series, Руководство пользователя, Страница: 18 / 24

en
Cleaning and servicing
18
Setting Selection Description
⁠ ⁠ – Fan switches off when the hob is switched off.
– Switched on in automatic mode
1
– Switched on with standard fan run-on
– No change to settings
Fan run-on
Setting whether / how fan is to run on after switch-
ing off the hob.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
⁠ ⁠ – Switched off
– Switched on
1
The light switches itself on when the hob is
switched on.
Light switched on automatically
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
⁠ ⁠ – Switched off
1
– The light switches itself off when the hob is
switched off.
Light switched off automatically
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
1 Factory setting (may vary according to model)
16 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
16.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, the online shop or a
retailer.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Never use unsuitable cleaning products.
Unsuitable cleaning products
¡
Undiluted detergent
¡
Detergent intended for dishwashers
¡
Abrasive cleaners
¡
Aggressive cleaning products such as oven spray
or stain remover
¡
Abrasive sponges
¡
High-pressure or steam jet cleaners
16.2 Cleaning the glass ceramic
Clean the hob after every use to stop cooking residues
from getting burnt on.
Note:
Note the information on unsuitable cleaning
products.
→
Page 18
Requirement:
The hob has cooled down.
1.
Remove heavy dirt using a glass scraper.
2. Clean the hob with a cleaning product for glass
ceramic.
Follow the cleaning instructions on the product
packaging.
Tip:
You can achieve good cleaning results if you
use a special sponge for glass ceramic.
16.3 Cleaning the hob surround
Clean the hob frame after use if dirty or stained.
Notes
¡
Note the information on unsuitable cleaning
products.
→
Page 18
¡
Do not use the glass scraper.
1.
Clean the hob frame with hot soapy water and a soft
cloth.
Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
17 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced with a special connection cable,
which is available from the manufacturer or his Cus-
tomer Service.