Siemens ET475FYB1E, Инструкция по эксплуатации

Страница: 10 / 32

en
Childproof lock
10
Tips and tricks
■
When the heating up light goes off, place the food
on the appliance. This also applies when raising the
temperature to fry a second item which requires a
higher setting.
■
Press the pieces of meat, poultry or fish flat onto the
frying surface using the spatula. Only turn the meat,
when it comes away from the surface easily, in order
to protect the structure of the meat. Damaging the
structure can cause juices to escape and results in
the meat drying out.
■
Keep the pieces of meat, poultry or fish apart so that
they do not draw any liquid.
■
Avoid pricking or cutting meat before or during
frying, in order to retain meat juices.
■
Do not salt the food before frying, to prevent liquid
and soluble nutrients from escaping.
■
Turn fish fillets in flour before frying. The fish will be
easier to turn.
■
Turn fish fillets only once if possible. Place fish onto
the appliance with the skin facing downward.
■
Use oil and fat that is suitable for frying, for example
plant oil or concentrated butter.
A
Childproof lock
Childproo f lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Switching on
1.
Switch off the appliance.
2.
Touch the
„
symbol for at least 4 seconds.
The
‚
indicator lights up for approximately
10 seconds. The appliance is locked.
Switching off
Touch the „ symbol until the 1 symbol goes out.
The childproof lock is deactivated.
Automatic childproof lock
This function automatically activates the childproof lock
every time you switch the appliance off.
Switching on
Switch on the automatic childproof lock.
~
"Basic
settings" on page 12
O
Time-setting options
Time-sett ing optio ns
There are 2 different time-setting options:
■
Kitchen timer
■
Stopwatch
Kitchen timer
You can use the kitchen timer to set a time of up to
99 minutes. It runs independently of all the other
settings.
Setting the kitchen timer
1.
If the appliance is switched off, touch the
0
symbol
once; if it is switched on, touch the
0
symbol twice.
The
V
indicator lights up.
‹‹
min lights up on the
display.
Note:
When the appliance is switched on, pressing
the 0 symbol once switches on the stopwatch.
2.
Set the desired time in the settings range.
The timer starts counting down after a few seconds.
When the time has elapsed
When the time has elapsed, an audible signal sounds
and
‹‹
flashes on the display for 10 seconds.
The
V
indicator flashes.
Touch any symbol.
The indicators go out and the audible signal ceases.
Setting the correct time
Use the 0 symbol to select the kitchen timer and reset
the time.
Stopwatch
The stopwatch displays the time that has passed since
it was activated.
The stopwatch only works when the appliance is
switched on. When the appliance is switched off, the
stopwatch is switched off as well.
Note:
If the kitchen timer is selected in addition to the
stopwatch, the setting will appear on the timer display
for 10 seconds. The stopwatch will then be displayed
again.
Switching on
1.
Touch the
0
symbol.
‹‹
is shown on the display.
2.
Touch the control panel.
Timing starts. Seconds are displayed during the first
minute, then minutes. After 10 seconds the timer
display goes out and the temperature is shown.
3.
Touch the
0
symbol to show the timer display
again.
Switching off
1.
Touch the 0 symbol.
The timer display will be shown.
2.
Touch the control panel.
The stopwatch will be switched off. The timer display
will go out.