1
Installation Guide
E87010-A0354-T002-A1-14CL
June 2015
for ESP200
Fig. 1
Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092 www.usa.siemens.com
1 DIP Switch Settings
Wire contactor per enclosed diagram.
2 Wiring
Hazardous voltage.
Will cause death or serious injury
.
To avoid electrical shock or burn, turn off main and control
voltages before performing installation or maintenance.
(If ESP200 has
windows
) Push one motor lead through each pass-through
window in the overload relay, and connect to the contactor terminals (T1,T2,T3).
(Use only with 3-phase motors at 50/60Hz).
(If ESP200 has
terminals
) Connect each motor lead to the overload relay
terminals (T1, T2, T3).
(Use only with motors at 50/60 Hz).
THIS EQUIPMENT CONTAINS HAZARDOUS VOLTAGES. DEATH,
INJURY, OR PROPERTY DAMAGE CAN RESULT IF SAFETY INSTRUCTIONS ARE NOT
FOLLOWED. ONLY QUALIFIED PERSONNEL SHOULD WORK ON OR AROUND THIS
EQUIPMENT AFTER BECOMING THOROUGHLY FAMILIAR WITH ALL WARNINGS,
SAFETY NOTICES, AND MAINTENANCE PROCEDURES CONTAINED HEREIN. THE
SUCCESSFUL AND SAFE OPERATION OF THIS EQUIPMENT IS DEPENDENT UPON
PROPER HANDLING, INSTALLATION, OPERATION AND MAINTENANCE.
QUALIFIED PERSON
FOR THE PURPOSE OF THIS MANUAL AND PRODUCT LABELS, A QUALIFIED PERSON
IS ONE WHO IS FAMILIAR WITH THE INSTALLATION, CONSTRUCTION AND
OPERATION OF THE EQUIPMENT, AND THE HAZARD INVOLVED. IN ADDITION, HE OR
SHE HAS THE FOLLOWING QUALIFICATIONS:
a) Is trained and authorized to energize, deenergize, clear, ground and tag circuits and
equipment in accordance with established safety practices.
b) Is trained in the proper care and use of protective equipment such as rubber gloves, hardhat,
safety glasses or faceshields, flash clothing, etc., in accordance with established safety practices.
c) Is trained in rendering first aid.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS IN
EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET IN CONNEC-
TION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD FURTHER INFORMATION
BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE WHICH ARE NOT COVERED
SUFFICIENTLY FOR THE PURCHASER’S PURPOSES, THE MATTER SHOULD BE REFERRED TO
THE LOCAL SIEMENS SALES OFFICE. THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL
NOT BECOME PART OF OR MODIFY ANY PRIOR OREXISTING AGREEMENT, COMMITMENT OR
RELATIONSHIP. THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF
SIEMENS. THE WARRANTY CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE
SOLE WARRANTY OF SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW
WARRANTIES OR MODIFYTHE EXISTING WARRANTY.
100% FLA
~ 3 min.
100% FLA
MAN.
MAN.
AUTO
AUTO
O
O
O
O
95
96
95
96
OFF
OFF
OFF
OFF
AUTO
OFF
ON
ON
PHASE UNBAL ON
PHASE LOSS ON
RESET MODE MAN.
GROUND FAULT ON
CLASS 5 10 20 30
ESP200
FULL LOAD AMPS
RESET
TEST
CAT.NO.
48ATC3S00
3UBB123-4CW2
95
96
A3+
A4- 97 98
5
6
4
3
12
10
7
8
9
5
TRIP CLASS
PHASE UNBAL ON
PHASE LOSS ON
OFF
OFF
RESET MODE MAN
GROUND FAULT ON
AUTO
OFF
10
20
30
T1
T3
(with windows)
(with terminals)
T2
T1
T3
T2
Fig. 2
Fig. 3
SERIOUS PERSONAL
Trip Current:
125% of Full Load Current.
Phase Loss:
Trip time in < 3 seconds.
Ground Fault trip: Ground fault current > 60%
of present motor current.
Reset Mode:
Automatic or Manual.
