Siemens ER94331HK Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 32

Siemens ER94331HK Скачать руководство пользователя страница 13

According to the Gas Safety Regulations of Hong Kong, any
gas installation works including the installation of appliances
and connection tubing, must be undertaken by registered
gas installers who are registered for that appropriate classes
and be employed by registered gas contractors.

Before installation, please carefully check the nameplate on
your gas hob. Make sure that the gas hob type specified on
the nameplate (which is stuck to the back shell) is consistent
with the gas that you are currently using. If you have any
doubts on whether the gas you are using is consistent,
please contact our Customer Care Hotlines.

Install a special gas valve between the indoor gas connecting
hose and the gas hob, in order to switch on and off the gas.
It should be installed in such a way that in the event an
accident occurs during operation period, the user will be able
to immediately shut of the gas. In addition, please ensure
this gas valve can be accessed at all times.

Please install the domestic range hood with an exhaust pipe
in accordance with the local gas hob installation specification
and guides. This type of range hood should have a distance
of at least 650mm to the gas hob.

The gas hob has already received a strict gas leakage
performance test before leaving the factory. Do not dismantle
the faceplate or inner parts during the installation of the gas
hob, to avoid later gas poisoning and fire risk resulting from
the gas leakage during the operation.

Please ensure that when the installation is completed, the
gas hose connected to the gas hob does not touch any
movable object in the cupboard, e.g. drawer, roller etc.

Please confirm the flashboard are safe and grounded.

If you move house and intend to reinstall the gas hob to your
new house, please contact our Customer Care Hotlines.

Installation

10

Gas hob

Shutter

Gas hob

Shutter

Gas hob

Ventilation pipe

«
...
11
12
13
14
15
...
»

Содержание ER94331HK

































Отзывы:

Нет отзывов