Siemens ER3A6AD70A, Инструкция пользователя

Страница: 10 / 20

en
Getting to know your appliance
10
Calibrating the electronics
As soon as the new appliance has been installed,
calibrate the electronics in accordance with the figure.
Never remove the gas valve shaft. In the event of
damage, the gas valve must be completely replaced.
*
Getting to know your
appliance
Getting to know y our appli ance
Burner locations
!
Pan supports
"
Control knobs
#
Dual-wok burner with an output of up to 6.1 kW
Controls and burners
Each control knob is marked with the burner it controls.
You can use the control knobs to set the output
required in each case to various positions between the
maximum and the minimum settings. Never try to switch
directly from position 0 to position 1 or from position 1
to position 0.
V
V
Indicators
Ò
Burner controlled by control knob
Ú
Switched-off burner
9 Highest power setting and electric ignition
1 Lowest power setting
Displays
³
Electric ignition
Š - ‚
Heat settings
‹
Switched-off burner
• - œ
Residual heat
(5$$'$
1
2