Siemens EQ.500 S700, Руководство пользователя

Страница: 37 / 85

Troubleshooting en
37
Errors Cause Troubleshooting
Display shows "Please refill
water tank" despite the fact
that the water tank is full.
Limescale deposits in the wa-
ter tank are blocking the sys-
tem.
1.
Clean the water tank thoroughly.
2.
Start the descaling programme.
→ "Using the descaling programme",
Page 33
Display shows "Fill the bean
container with coffee beans."
despite the fact that the ban
container is full.
The grinder is not grinding
any coffee beans despite full
bean container.
Beans are too oily and are not
falling into the grinder.
▶ Gently tap the bean container.
▶ Change the coffee variety.
Do not use oily beans.
▶ Clean the empty bean container with
a damp cloth.
Display shows "Please clean
brewing unit, replace and
close door.".
Brewing unit is soiled. ▶ Clean the brewing unit.
→ "Cleaning brewing unit", Page 32
Mechanism of brewing unit is
stiff.
▶ Clean the brewing unit.
→ "Cleaning brewing unit", Page 32
Too much ground coffee in
the brewing unit.
▶ Use no more than 2 level measuring
spoons of ground coffee.
→ "Cleaning brewing unit", Page 32
Display shows "Voltage (V) in-
correct.".
Voltage in the house system is
incorrect.
▶ Only operate the appliance at 220 -
240 V.
Display shows "Please restart
appliance.".
Brewing unit is heavily soiled
or cannot be removed.
▶ Restart the appliance.
▶ Clean the brewing unit.
→ "Cleaning brewing unit", Page 32
Appliance has a fault.
1.
Pull out the mains plug and wait
10 seconds.
2.
Re-insert the mains plug.
Display very frequently shows
"calc'nClean".
Water is too hard.
1.
Insert a new water filter.
→ "Insert water filter", Page 22
2.
Set the corresponding water hard-
ness.
→ "Setting the water hardness",
Page 16
Incorrect or too little descal-
ing agent used.
▶ When descaling, only use suitable
tablets.
Service programme has not
been carried out in its entirety.
▶ Reset the service programme.
→ "Resetting service programmes",
Page 33