Siemens EH9..SZ..., Инструкция по эксплуатации, Страница: 10 / 16

10
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
# symbol for approx. 4
seconds. The
@
symbol lights up for 10 seconds. The range
is locked.
To deactivate: press and hold the
#
symbol for approx. 4
seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level Š .
Use limitations
This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the display for the selected hotplate will flash › and
Š ; then it will automatically set the power level Š .
In Group 2, the Powerboost function may be activated at the
same time for all hotplates. (see diagram)
Note:
The Powerboost function can be activated in the flexible
zone when used as a single hotplate. In this case, place the
pan in the centre as shown in the Flexible zone section.
To activate
1.
Select the power level
Š
.
2.
Press the programming panel located above the
@ ›
symbol.
The function has been activated.
To turn off
Press the programming panel located above the
@ ›
symbol.
The Powerboost function has been deactivated.
Note:
In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■
to automatically switch off a hotplate.
■
as a timer.
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
Program the cooking time.
The hob must be switched on:
1.
Select the desired power level.
2.
Press the
0
symbol for the desired hotplate. The hotplate
display shows
‹‹
and the
x
indicator comes on.
3.
Within the next 10 seconds, select the desired cooking time
in the programming zone. The possible default setting is,
from left to right: 1, 2, 3, etc., up to 10 minutes.
The cooking time will be displayed for 10 seconds and will then
begin to count down.
Note:
The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The
Basic settings chapter provides information on
automatically programming the cooking time.
*URXS
*URXS *URXS