Possible problems during the installation
In very exceptional cases it might happen that the driver installation
will not be completed. It can be due to incorrect procedure during the
installation. In such a case stop the installation programme, keep the
ES75 modem connected to the computer and start the installation
again (this time do not disconnect ES75)
Checking successful installation
After restarting the computer the successful installation is indicated
by following specifications:
Menu Start contains new references:
Start>Programms>EDGESpeed ES75 USB>EDGESpeed ES75 USB
Start>Programms>EDGESpeed ES75 USB>Uninstall
or
EDGESpeed ES75
for installation in COM port
An icon for starting the programme will appear in the screen.
Following items are added to the control panels:
in the Modems folder it is a new driver:
Siemens AG WM USB modem / EmemTModem
in the network connection:
ES75USBConn / ES75Conn
Operation instructions
If it is not possible to connect, check your Firewall set-up.
If during the connection to the internet via USB speed of 38400 kbps
is displayed, it is only initial setting which does not affect the actual
data transmission speed in any way.
During data transmittion and surfing the net SW problem in your PC
(operation system drop-out, programmes mistakes) or a temporary
problem in data transmission in the net of the operator can
sometimes cause outage of ES75. In such a case disconnect and
connect to GPRS again.If this does not help, it is necessary to
disconnect and again connect USB cable or restart PC.
Customer care
For current information about the product see the webpages
http://ww.siemens.cz/wm
EDGE Speed ES75 is approved according to the essential directives R&TTE for operation
in the EC countries and Switzerland.
4
The declaration of conformity has been issued and can be obtained from
the above mentioned webpage.