manualshive.com logo in svg

Siemens EC645HB90A, Инструкция пользователя

Поделиться
Скачать
Siemens EC645HB90A Скачать руководство пользователя страница 21

22

Protection against power 

failures

If your timer has a programme in progress and there is a 

power failure, the programmed burners will be turned off 

as a means of protection. As soon as the power supply 

returns, the display will show the 

˜‹

 message. To be able 

to use the timer once more, touch any of the symbols and 

the display will turn off and your hob will be ready to be 

programmed.
The 

˜‹

 message also appears the first time the hob is 

connected to the power supply. To start using the timer, 

touch any of the symbols and the display will turn off and 

your hob will be ready to be programmed.

Notes

A whistle sounds when water is spilt on any of the 

sensors.
The system will not work if it is handled with wet hands.

The digital display

Messages on the digital 

display

Time remaining until the first 

programme stops.

This bell indicates that 

the countdown timer has 

been programmed.

The point indicates that the 

cooking timer has been 

programmed.

Symbols.

Programmed burner 

indicators.

A bright dot indicates

that the time we see 

corresponds to this 

burner.

The attenuated 

symbols mean that, in 

addition to the 

programme shown on 

the display, there are 

other programmes in 

progress.

•

Excess temperatures (See 

Protection against 

excess temperatures).

˜–

Timer button lock (See 

Timer button lock

).

˜‹

Connecting the appliance to the power 
supply/Power failure (See 

Protection against 

power supply failure

).

Содержание EC645HB90A


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды