Document No: IOM-002
Issue Date:
24/09/2020
Revision:
6
Page:
14 of 42
Unrestricted
Risk of injury and material damage due to testing, maintenance and
repairs carried out incorrectly or not at all
The oil-filled hoses and connectors are non-serviceable by the user. In case of suspected faults with
the product (refer to section 8.2), do not use the product and contact Siemens Energy Technical
Support or Siemens Energy Product Safety for advice. Never attempt to carry out maintenance work
or repairs on the product yourself.
Danger!
Risk of death from electric shock if user dismantles / incorrectly re-assembles /
incorrectly terminates product (foreseeable misuse).
-
There are no parts of the product that require maintenance or inspection. The product
should not be disassembled.
-
Termination of electrical wires to the product must only be carried out by a competent
person.
Danger!
Risk of death from electric shock from improper use of test connector
(foreseeable misuse). In particular, removal of the rubber termination sleeves placed over
the joint between the cable and the test connector is prohibited, as this will expose live
parts to the user.
-
Never disassemble a test connector
Danger!
Risk of imminent danger to life, risk of severe personal injury caused by released
pressure and or projectile due to incorrectly installed pressure retaining product, (e.g. bulk-
head connector or penetrator) during system pressure test, or the rated differential
pressure of the product is exceeded
-
Ensure all product assembly and testing activities are completed by competent
persons.
-
Do not exceed the maximum differential pressure rating of the product installed.
-
Individual products have different differential pressure ratings, refer to the specific
product datasheet or contact Siemens Energy Technical Support
Warning.
Risk of minor personal injury from high temperature of the product due to ohmic
heating in short-circuit condition or high over-currents.
-
In the event of a high over-current, allow the connectors to cool before touching.
-
Ensure all testing of products both factory and deployed in-field have been completed
by competent persons.
Danger!
Risk of severe personal eye injury due to pressurised oil squirting out of damaged
hose or removal of fill/vent screw.
-
Ensure all testing of products both factory and deployed in-field have been completed
by competent persons.
Warning.
Risk of eye/bodily injury caused by released pressure during product
disassembly, in the event of retrieval from subsea with a fault that causes depth pressure
to be trapped inside the product.
-
Ensure all product disassembly activities are completed by competent persons in
accordance with relevant procedures and using relevant personal protective
equipment (PPE).
Warning.
Risk of bodily injury caused by pressure retaining parts becoming projectile due
to user over-pressurising the system, e.g. during Site Installation Test (SIT).
-
Ensure all product SIT activities are completed by competent persons in accordance
with relevant procedures.
