GAMMA
instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single
UP 241,
neutral
5WG1 241-2AB_1
UP 242,
with I/O symbols
5WG1 242-2AB_1
Pushbutton double
UP 243,
neutral
5WG1 243-2AB_1
UP 244,
with I/O symbols
5WG1 244-2AB_1
Pushbutton quadruple UP 245,
neutral
5WG1 245-2AB_1
UP 246,
with I/O symbols
5WG1 246-2AB_1
DELTA style
Pushbutton single
UP 285,
neutral
5WG1 285-2AB_1
Pushbutton double
UP 286,
neutral
5WG1 286-2AB_1
Pushbutton quadruple UP 287,
neutral
5WG1 287-2AB_1
Technical Manual
UP 24x-28x_Taster, 7 pages
Siemens AG
Automation and Drives Group
Update: http://www.siemens.de/gamma
©
Siemens AG 200
Electrical Installation Technology
Subject to change without prior notice
P.O. Box 10 09 53, D-93009 Regensburg
2.16.1.5/6
Drawing for mounting the fixing screws
C7
Pushbutton single
Pushbutton double / pushbutton quadruple
Holding down as shown with pushbutton single
Diagram 4: Lifting out the rockers
Inserting pictograms
•
Lift out the pictogram cover (A5) with the screwdriver
by applying leverage, during this hold down the
pushbutton module (C4).
DELTA profil
•
Insert the screwdriver into the slot (A2) until it
reaches the stop and then wiggle it.
1)
2)
Diagram 5: Lifting out the pictogram cover
•
Lay the pictograms onto the foundation.
•
Snap on the pictogram cover (A5) again.
DELTA style
1)
2)
1)
Insert the screwdriver between the frame and
the pushbutton module.
2)
Swivel the screwdriver towards the wall.
Diagram 6: Lifting out the pictogram cover
