manualshive.com logo in svg

Siemens D981, Техническое руководство

Поделиться
Скачать
Siemens D981 Скачать руководство пользователя страница 39

A26361-D981-Z120-9-7419

System board D981

Technical Manual

May 1998 edition

Adaptec and SCSISelect are registered trademarks of Adaptec, Inc.

Creative is a registered trademark, Sound Blaster 16 and VIBRA 16C are trademarks of
Creative Technology Ltd.

Intel and Pentium are registered trademarks and MMX is a trademark of Intel Corporation,
USA.

Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.

PS/2 is a registered trademark of International Business Machines, Inc.

All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.

Copyright 

 Siemens Nixdorf Informationssysteme AG 1998

All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.

Delivery subject to availability. Right of technical modification reserved.

Содержание D981








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды